When it comes to measuring electricity, the Fluke 87V is ammeter legend. With its high accuracy and robustness for electricians in industry who need meters that won’t let them down- this one’s an all rounder.
This high-end 80 series is the pros’ choice for tough jobs. Built like a brick and trusted enough to work with complex signals, this meter will not let you down.
This model can handle currents up to 20A which makes it perfect when working on electrical systems or electronic devices that require extra attention in order to fix them correctly.
The Fluke 87V is an excellent tool for any professional who needs to measure true RMS values. It has all of the test ranges and features that you could want, including capacitance measurements with its auto-touch feature! In my review I explore what makes this Made in America diamond so great while browsing through inner workings – just take a look at some points:
1) The dual resolution screen offers 20000 counts per inch (although these days even higher count displays are becoming more popular).
2),It comes standard equipped w/a high precision Nano Balance analyzer tip allowing accurate Resistance & Capacitances readings .
Key Features
- Built-in thermometer
- True RMS AC voltage and current
- Selectable filter for accurate motor drive analysis on voltage and frequency
- Auto and manual ranging
- DC accuracy to 0.05%
- Measures up to 1000V AC and DC
- Measures 10A continuous, 20A for 30s
- Resistance, continuity and diode test
- Capacitance to 10,000µF
- Dual display resolution – 6000-count / 20000-count
- Large backlit display
- Analog bar graph for fast changing signals
- Min/Max/Average
- Auto hold
- Relative mode
- Probe leads warning
- Safety rating – CAT-III (to 1000V), CAT-IV (to 600V)
- Made in USA
- Lifetime warranty
- Size: 7.9″ (201mm) x 3.86″ (98mm) x 2″ (52mm)
- Weight: 22oz (625g)
In-detail Review of the Fluke 87V Multimeter
Fluke 87V Digital Multimeter with a NIST-Traceable Calibration Certificate with Data
Reasons To Buy
✓Wide functionality range for industrial, HVAC, and general electrical applications
✓Low pass filter for VFD work
✓Peak Capture function for 250 µS intermittents
✓Dual resolutions: 6,000 counts, 3-3/4 digit or 20,000 counts, 4-1/2 digit
✓True RMS waveform measurement
✓Third edition of EN 61010-1 to 1000 V CAT III and 600 V CAT IV Safety Rating and can handle 8000V spikes
✓Large display and backlight with two brightness levels
✓Withstands a 1-meter drop in holster, which includes a kickstand and probe storage
✓Extra Power up options
✓TL75 Leads, AC175 Alligator Clips, and 80BK Temp Probe included
✓Audible alerts
✓Lifetime warranty
Reasons To Avoid
✗Fairly heavy
✗Pricey
✗No separate fuse compartment
These oldies but goodies still have a place in today’s technology. The 80 series is great for measuring AC voltage and current signals that are non-linear, such as those from drive systems outputting power demands too high or low per specifications.”
The Fluke 87 is an industrial multimeter that’s also great for lab based electronics or automotive repair work. It can measure down to 0.1 microwatts and nano farads, with resolutions of 100 picocoulombs/volts or 10 nanometers respectively! You’ll be able to keep track of all your experiments thanks to this high precision device.
What makes this meter so great is the Range button, which converts it to manual range and can be used for even faster results. It has a super-fast latching beeper on continuity that will let you know if your input goes unnoticed while testing with other devices in range or not.
The best feature about this device is that it can automatically Touch Hold, which means you don’t have to press anything while taking measurements. There are also different modes like Min/Max-Average and Relative for preserving signals when they’re fluctuating less than other devices may do or not at all; however its most important function still remains zeroing in on steady values with pinpoint accuracy every time.
The multimeter‘s default setting of AC may be inconvenient for those in the electronic, automotive and DC drive worlds. However with separate voltage ranges it can still measure both types on one device.
The multimeter is a great tool for measuring voltage and current. It’s battery operated which means you don’t need an external power source, but it also lasts long enough that prices might change depending on where you purchase.
Build Quality and Design
The Fluke 87V is an excellent Made in the USA product that can handle industrial settings. This durable tool has high build standards and comes with approvals from various agencies including: UL, TÜV CSA VDE to name just a few.
The design of the buttons and selector is perfectly proportioned to make sure you can operate it with ease. There’s also a raised case that runs along all four sides, which protects your phone from scratches when in use or storage.
Display and Labels
The Fluke 87V with its dual displays and bar graph is an upgrade over previous versions of the device, providing sharper digits that give you a better overview in virtual real-time. The 6K count resolution can show slight millivolt changes while 32 segment analog like bars update at 40 times per second to make sure any potential problems are picked up quickly.
The world of high-end measuring nirvana is available for those who seek it, but the 87V multimeter has everything you need. If resolution or accuracy are more important to your work than having every last voltage drop measured exactly as prescribed by law then Fluke 289 would be an excellent choice in meters; they’re usually less expensive too.
With a backlit display and dual brightness options, this meter makes it easy to see what you need in any situation.
The simplicity of this device is what makes it so intuitive to use. The dials are clear, the buttons straightforward – there’s nothing more you could ask for.
Function / Performance
The multimeter’s 8-position dial selector and 7 buttons allow you to choose from a variety of measurements, including the standard ones as well as more advanced settings. Most ranges can be covered with just one setting on this device – for instance it takes only two clicks (or less) in order change over from AC voltage mode into DC 3 Volts tester or milliamps range; meanwhile low impedance tests such 1kHz AC signal will only require three presses especially when using our special test leads which are designed specifically according to international standards.
With a response time that is exceptional on continuity detection, and battery life preserved through the use of an option to sleep mode, Fluke 87V review overall has been shown as being one with outstanding performance. 400 hours worth per charge allows it to sit unused for long periods without losing power which makes this device perfect if you’re looking at saving your work or just need some peace while working away at home.
Protection
Fluke multimeters are a sound investment for any professional who needs to do their job properly. They provide maximum protection both mechanically and electrically, thanks in part due Flukes sturdy design that features an IP67- rated housing with tough rubber booting – complete battery isolation protects against electrical failures when out on site work without access points or outlets nearby.
The exterior of the device is made from a hard-wearing material that makes it resistant to oil, dirt and water ingress. In addition there’s also a deep groove on its inner case as well as banding for added protection against impacts or scratches. Jack inputs are set in module type configuration with rubber o Ring gasket incorporated into design – this helps make splash resistance even more effective! The product can stand up well under cold dry hot humid environments making it a perfect choice whether you need something lightweight yet durable suchlike during travel season where carrying cases may get bulky.
The circuit board is designed with solid traces and high-quality PCB components. A metal shield on the rear protects both electronics as well as your immediate environment, in addition to being straightforward to disassemble for easy cleaning.
The multimeter has some great features to prevent damage. If you plug the lead into a wrong input jack socket, for instance – in this situation will get an audible beep and warning message on the display screen about it so that cannot happen again.
SAFETY RATING, FUSES
The output is professional and concise. It includes information about the safety rating, which encompasses both categories III (1000V) as well IV(600 volts). Additionally it tells you that there are two amperage circuits on this unit with CPR fuses for protection in case something goes wrong during operation or if contact is made by mistake because they’re so durable.
Who’s it For?
While the Fluke 87V meter is perfect for any professional, it has been primarily designed by engineers and technicians in industries where precision matters. This heavy-duty device will give you more accuracy than some other types of equipment might require depending on your trade or field work situation – but don’t let its size fool ya! It can still fit into tight spaces too 🙂
Who Should Buy it?
The Fluke 87V is a digital multimeter that will be helpful to anyone in the HVAC industry, but professionals like engineers and technicians get more use out of it. This meter has many advanced features with accuracy beyond what most people need for their home projects or other building trades work – if they know how to take advantage.
Conclusion
The Fluke 87V is a high-end multimeter that will last for many years of service. It has accurate measurements, reliable build and good resolution across most ranges making it perfect if you’re looking to buy an expensive device or are beginners at using these types of equipment.
The output should be like this: The users can expect top notch performance from their purchase because they get what’s usually seen in professional settings which includes accuracy as well as having durable material construction so even when faced against harsh conditions outdoors work fine too.
